Ram may be preparing a new sort of tailgate that could rethink the way we access the bed of the company's pickup trucks. Rather than the typical fold-down tailgate that we know so well, patent drawings show a tailgate that combines the functionality of a traditional fold-down design with a 50/50 split that can, individually, be opened like a barn-door design or dropped flat like a standard tailgate.
Now, Ram is far from the first to toy around with something like this. The most obvious example is the Honda Ridgeline, which features a single-piece tailgate that is double-hinged so that it can open traditionally or be swung out to the side. The big news here is the split and the fact that each half can be used independently of the other. Unlike the Honda, the individual halves would be operated via touchpads.
The implications of this new design aren't entirely clear right now. It seems possible that the rendering could just be for a concept vehicle, but production is certainly possible as well – Ram has shown a real willingness to innovate in the pickup segment as of late, with features like coil-spring rear suspensions, light-duty diesels and the Ram Box bedside storage system.
Source: autoblog.com
Wednesday, June 25, 2014
Thursday, June 19, 2014
Chrysler says its 8-speed transmissions will save 700 million gallons
Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons.
According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration.
For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8.
Source: autoblog.com
According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration.
As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel.
For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8.
Source: autoblog.com
Subscribe to:
Comments (Atom)

